Sang-Jin Kim Conference Papers （ 研討會論文 ）
[1] W.S. Choi, J.M. Sohn and S.J. Kim, Experimental investigation of offshore wind turbine structure on structural behavior under lateral loads. Proceedings of 43rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), 9-14 June 2024, Singapore.
[2] H.G. Lee, S.J. Kim, J.M. Sohn and A.R. Prabowo, Machine leaning based prediction of buckling in composite cylindrical shells under external pressure using design code, Proceedings of 43rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), 9-14 June 2024, Singapore.
[3] D.K. Kim, A.M.K. Wong, J. Hwang, S. Li, S.J. Kim and N.K Cho, Development of practical design formula for predicting the ultimate compressive strength of the cylindrically curved plates applicable in offshore wind turbine tower, Proceedings of 43rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), 9-14 June 2024, Singapore.
[4] H.K. Lee, S.J. Kim and J.M. Sohn, Sensitivity analysis of effective engineering constant and buckling pressure on composite cylinder structures using machine-learning, Proceedings of 36th Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2023), 10-13 October 2023, Busan, Republic of Korea.
[5] G. Taimuri, H. Le Sourne, T. Mikkola, S.J. Kim, P. Kujala and S. Hirdaris, Comparison of a simplified FSI model against super element model for the rapid evaluation of accidental loads following ship hard grounding, Proceedings of the 9th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2023), 11-13 September 2023, Nantes, France.
[6] H. Nubli, S.J. Kim, J.M. Sohn, D. Jung and J.H. Cho, A tensile test and finite element analysis of DH36 high-tensile steel at cryogenic temperature, Proceedings of 42nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), 11-16 June 2023, Melbourne, Australia.
[7] S.J. Kim, M. Kõrgesaar, P. Lehto, K. Berntsson, J.M. Sohn, S. Hirdaris, J. Romanoff, Review of the uncertainties in load and strength modelling in ship collisions, Proceedings of 8th International Conference on Marine Structures (MARSTRUCT 2021), 7-9 June 2021, Trondheim, Norway.
[8] H. Le Sourne, S.J. Kim, F. Conti, E. Bae, J.P. Pineau, T. Looten, L. Kaydihan, D. Vassalos, P. Kujala and S. Hirdaris, A comparison of crashworthiness methods for the assessment of ship damage extents, Proceedings of 1st International Conference on the Stability and Safety of Ships and Ocean Vehicles (STAB&S 2021), 7-11 June 2021, Glasgow, UK.
[9] S.J. Kim, G. Taimuri, P. Kujala, F. Conti, H. Le Sourne, J.P. Pineau, T. Looten, H. Bae, M.P. Mujeeb-Ahmed, D. Vassalos, L. Kaydihan and S. Hirdaris, Uncertainties in modelling loads following collision and grounding events, 5th Joint ISSC/ITTC International Workshop, 1-3 June 2021, Lisbon, Portugal.
[10] S.J. Kim, M. Körgersaar, G. Taimuri, P. Kujala and S. Hirdaris, A quasi-dynamic approach for the evaluation of structural response in ship collisions and groundings, Proceedings of the 30th International Ocean and Polar Engineering Conference (ISOPE 2020), 11-16 October 2020, Shanghai, China.
[11] A. Rajput, M. Ak, S.J. Kim, S.H. Noh, J.H. Park and J.K. Paik, Effects of the surface preparation on the life of epoxy coating in steel ship plates: an experimental study, Proceedings of the 3rd International Conference on Ships and Offshore Structures (ICSOS 2018), 17-19 September 2018, Gothenburg, Sweden.
[12] J.K. Paik, D.H. Lee, S.J. Kim, G. Thomas and M. Ma, A new method for determining the design values of wave-induced hull girder loads acting on ships, Proceedings of the 3rd International Conference on Ships and Offshore Structures (ICSOS 2018), 17-19 September 2018, Gothenburg, Sweden.
[13] S.J. Baek, J.M. Sohn, J.K. Paik and S.J. Kim, Development of rapid prediction method for residual strength of oil tankers subjected to ship-ship collision’, Proceedings of ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June 2018, Madrid, Spain.
[14] J.K. Paik, S.J. Kim, Y.K. Ko and S.A.M. Youssef, Collision risk assessment of a VLCC class tanker, Proceedings of SNAME Maritime Convention 2017, 23-28 October, TX, USA.
[15] Y.K. Ko, S.J. Kim and J.K. Paik, Contribution of a deformable striking-ship structure to the structural crashworthiness of ship-ship collisions, Proceedings of the 2nd International Conference on Ships and Offshore Structures (ICSOS 2017), 11-13 September, Shenzhen, China.
[16] S.J. Kim, B.J. Kim, J.K.Seo and J.K. Paik, A new method for structural assessment of topside structure subjected to hydrocarbon explosions, Proceedings of International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016), 11-14 December 2016, New Delhi, India.
[17] J.K. Paik, K.J. Kim, J.H. Lee, B.G. Jung, X. Han and S.J. Kim, Test database of the mechanical properties of mild, high-tensile and stainless steel and aluminum alloy associated with cold temperatures and strain rates, Proceedings of the 1st International Conference on Ships and Offshore Structures (ICSOS 2016), 31 August - 2 September 2016, Hamburg, Germany.
[18] S.J. Kim, J.B. Park, B.J. Kim, J.K. Seo, J.K. Paik, W.H. Shin and J.S. Park, Determination of fire accidental loads for aliminium safety helidecks, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2015), Busan, Korea, 15-16 September 2015.
[19] J.K. Paik, J. Czujko, S.J. Kim, J.C. Lee, B.J. Kim, J.K. Seo and Y.C. Ha, A new procedure for the nonlinear structural response analysis of offshore installations in explosions, Proceedings of SNAME Maritime Convention 2014, TX, USA, 22-24 October 2014.
[20] H.Y. Lei, S.J. Kim, J.C. Lee, C.B. Li, J.K. Paik and J.M. Sohn, Cost benefit analysis of corrugated blast walls, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[21] C.B. Li, S.J. Kim, J.C. Lee, J.K. Paik and J.M. Sohn, Dynamic structural response characteristics of perforated blast walls under hydrocarbon explosions, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[22] C.H. Song, S.J. Kim, J.K. Paik, H.B. Kim and D.K. Kim, Modified stiffener modeling technique for ultimate hull girder strength analysis by ALPS/HULL program, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[23] J.C. Lee, S.J. Kim, J.K. Seo, B.J. Kim, J.K. Paik, S.I. Park and Y.S. Hwang, Effects of joints and connections on nonlinear behavior of offshore platforms topside structures in explosions, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[24] S.I. Park, Y.S. Hwang, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, A study on structural strength assessment methods of topside structures on the offshore platform, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[25] S.J. Kim, Interface between FLACS and LS-DYNA for nonlinear structural consequence analysis, Fire and Blast Information Group Meeting, Busan, Korea, 14 May 2014.
[26] S.J. Kim and J.K. Paik, Advanced method for ship structural design under slamming impact pressure loads, Proceedings of the 12th Practical Design of Ships and Other Floating Structures (PRADS 2013), pp.172-178, Changwon, Korea, 20-25 October 2013.
[27] S.J. Kim, J.M. Sohn, B.H. Kim, C.K. Kim, J.K. Paik, M. Samuelides and G.M. Katsaounis, Computational modelling of interaction between CFD and FEA simulations under gas explosion loads, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2012), Busan, Korea, 23-24 May 2012.
[28] J.M. Sohn, S.J. Kim, B.H. Kim and J.K. Paik, A study on the procedure for quantitative assessment of explosion risks in offshore installations, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2012), Busan, Korea, 23-24 May 2012.
[29] D. K. Kim, D. K. Park, S.J. Kim, H. B. Kim, J. K. Seo, B. J. Kim and J. K. Paik, Time-variant ultimate strength characteristics of corroded FPSO hull structures, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2012), Busan, Korea, 23-24 May 2012.
[30] S.J. Kim, J.K. Seo and J.K. Paik, Interface between FLACS and LS-DYNA for nonlinear consequence analysis, FLACS User’s Group Meeting (FLUG 2012), Bergen, Norway, 15-16 May 2012.
[31] S.J. Kim, D.K. Kim, D.K. Park, J.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Effect of corrosion on the ultimate strength of double-hull oil tankers – part I: stiffened panels, Proceedings of The 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, Korea, 18-22 September 2011.
[32] D.C. Kim, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Computational and experimental fluid dynamic study of thermal radiation behavior of heat shield, ICCES`11 International Conference on Computational & Experimental Engineering and Sciences, Nanjing, China, 18-21 April 2011.
[33] J.M. Sohn, D.H. Kim, S.J. Kim, J.K. Seo, B.J. Kim, J.K. Paik, N. Underwood, G.K. Schleyer and S.N. Atluri, Nonlinear structural behavior of blast-loaded corrugated panels: analytical and numerical considerations, ICCES`11 International Conference on Computational & Experimental Engineering and Sciences, Nanjing, China, 18-21 April 2011.
[34] S.J. Kim, D.C. Kim, D.H. Kim, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, A benchmark study on the ultimate stiffened panel strength, ICCES`11 International Conference on Computational & Experimental Engineering and Sciences, Nanjing, China, 18-21 April 2011.
[35] J.K. Paik, S.J. Kim, D.C. Kim, D.H. Kim, P.A. Frieze, M. Abbattista, M. Vallascas and O.F. Hughes, Benchmark study on use of ALPS/ULSAP method to determine plate and stiffened panel ultimate strength, Proceedings of MARSTRUCT 2011, Hamburg, Germany, 28-30 March 2011.
[36] D.H. Kim, D.K. Kim, J.M. Sohn, MD.S. Islam, S.L. Kim, S.J. Kim, D.C. Kim, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, Nonlinear finite element method models for the buckling and ultimate strength analysis of steel stiffened-plate structures, The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, Busan, Korea, 17-21 August 2010.
[37] D.C. Kim, S.J. Kim, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, Computational fluid dynamics simulation of the thermal radiation behavior of heat shields, The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, Busan, Korea, 17-21 August 2010.
[38] S.J. Kim, J.Y. Yoon, G.C. Yu, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, Computational fluid dynamics modeling techniques and their application in gas explosions, The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, Busan, Korea, 17-21 August 2010.
[39] S.J. Kim, Effect of surrounding water on dynamic structural response of ships subject to navigational accidents, 44th Ocean Engineering Conference in Taiwan, Kaohsiung, Taiwan, 17-18 November 2022 (in Chinese).
[40] S.J. Baek, J.M. Sohn, J.K. Paik, S.J. Kim*, J.H. Byeon, A study on residual strength assessment to prevent sequential events of stranded oil tankers, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 8-9 November 2018 (in Korean).
[41] C.H. Song, S.J. Kim, D.H. Lee, J.K. Seo, M.S. Yi and C.M. Hyun, A study on the residual ultimate strength by post heating of high tensile thin-walled structures, The Annual Autumn Meeting, Society of Naval Architects of Korea, Yeosu, Korea, 2-3 November 2017 (in Korean).
[42] S.J. Baek, J.M. Sohn, J.K. Paik and S.J. Kim*, Development of method for calculation of residual strength of oil tanker to prevent a sequential event by collisions, The Annual Autumn Meeting, Society of Naval Architects of Korea, Yeosu, Korea, 2-3 November 2017 (in Korean).
[43] Y.K. Ko, S.J. Kim and J.K. Paik, Empirical formulation for calculation of strain-rate in collision, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 17-20 April 2017 (in Korean).
[44] M.H. Bae, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, An experimental and numerical study of combustible gas dispersion based on large-scaled experiment, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 19-20 May 2016 (in Korean).
[45] S.J. Kim, J.C. Lee, B.J. Kim, J.K. Seo, Y.C. Ha, J.K. Paik and J. Czujko, A new procedure for the nonlinear structural response analysis of offshore installations in explosions, The Annual Summer Meeting of the Korea Ship and Offshore Structures Congress, Society of Naval Architects of Korea, Busan, Korea, 18-19 September 2014. (in Korean)
[46] H.Y. Lei, S.J. Kim, J.C. Lee, C.B. Li, J.K. Seo, B.J. Kim and J.K. Paik, Cost benefit analysis of blast walls on offshore installations, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 22-23 May 2014 (in Korean).
[47] C.B. Li, S.J. Kim, J.C. Lee, H.Y. Lei, J.K. Seo, B.J. Kim and J.K. Paik, Structural response characteristics of perforated blast walls under hydrocarbon explosion, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 22-23 May 2014 (in Korean).
[48] Y.S. Kim, D.H. Lee, D.K. Park, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, The ultimate strength of stiffened panel in Arctic conditions, The Annual Autumn Meeting, Society of Naval Architects of Korea, Ulsan, Korea, 7-8 November 2013 (in Korean).
[49] S.J. Kim, D.J. Seong, J.C. Lee, C.B. Li, J.K. Seo, B.J. Kim and J.K. Paik, Structural impact characteristics of stiffened blast walls under explosion loads, The Annual Spring Meeting, Society of Naval Architects of Korea, Jeju, Korea, 23-25 May 2013 (in Korean).
[50] D.J. Seong, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Structural design of topside structure on offshore installation for verification experiment, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 15-16 November 2012 (in Korean).
[51] S.J. Kim, J.M. Sohn, B.H. Kim, D.J. Seong, D.K. Jo, J.K. Seo, B.J. Kim and J.K. Paik, The effect of explosion load shapes on corrugated blast wall on offshore installations, The Annual Spring Meeting, Society of Naval Architects of Korea, Daegu, Korea, 31 May – 1 June 2012 (in Korean).
[52] S.J. Kim, J.M. Sohn, D.K. Park, B.H. Kim, D.J. Seong, D.K. Jo, J.K. Seo, B.J. Kim and J.K. Paik, Structural impact characteristics of blast wall in Arctic conditions, The Annual Spring Meeting, Society of Naval Architects of Korea, Daegu, Korea, 31 May – 1 June 2012 (in Korean).
[53] J.M. Sohn, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, A study on development the interface for fluid-structural interaction analysis on offshore, The Annual Autumn Meeting, Society of Naval Architects of Korea, Mokpo, Korea, 3-4 December 2011 (in Korean).
[54] S.J. Kim, J.K. Paik, M.S. Kim and Tim Kent, Risk-based on structural design of nuclear-powered merchant ships: an overview, The Annual Autumn Meeting, Society of Naval Architects of Korea, Mokpo, Korea, 3-4 December 2011 (in Korean).
[55] S.J. Kim, D.K. Kim, D.K. Park and J.K. Paik, Ultimate strength based optimum structural design of a double-hull tankers using MEASTRO program, The Annual Autumn Meeting, Society of Naval Architects of Korea, Mokpo, Korea, 3-4 December 2011 (in Korean).
[56] J.M. Sohn, D.H. Kim, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, A study on nonlinear consequence structural analysis of blast wall on FPSO topsides under explosion loads, The Korean Offshore Design Committee Society of Ocean Engineers, Ulsan, Korea, 8 July 2011 (in Korean).
[57] D.K. Kim, D.K. Park, S.J. Kim, D.H. Park, H.B. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Effect of corrosion on the ultimate strength of double-hull oil tankers, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 2-3 June 2011 (in Korean).
[58] J.M. Sohn, D.H. Kim, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Structural responds analysis techniques of blast wall for P-I design curve, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 2-3 June 2011 (in Korean).
[59] B.H. Kim, J.M. Sonh, S.J. Kim and J.K. Paik, A study on various blast wall shapes for quantitative explosion risk assessment, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 2-3 June 2011 (in Korean).
[60] J.K. Paik, S.J. Kim, D.C. Kim, D.H. Kim, P.A. Frieze, M. Abbattista, M. Vallascas and O.F. Hughes, Benchmark study on use of ALPS/ULSAP method to determine plate and stiffened panel ultimate strength, Proceedings of Korean Ship and Offshore Structures Committee Society of Naval Architects of Korea, Seoul, Korea, 17 February 2011 (in Korean).
[61] J.M. Sohn, D.C. Kim, S.J. Kim, D.H. Kim, J.K. Paik, B.J. Kim and J.K. Seo, A benchmark study on the ultimate strength analysis techniques of stiffened panels, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[62] D.H. Kim, J.K. Seo, B.J. Kim, J.M. Sohn, G.Y. Yoon, S.J. Kim, and J.K. Paik, A study on structural design techniques of blast wall on FPSO Topsides, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[63] D.C. Kim, S.J. Kim, J.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, An experimental study on flare stack heat flux characteristics, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[64] S.J. Kim, J.K. Seo, B.J. Kim, J.Y. Yoon, D.H. Kim and J.K. Paik, A study on CFD gas dispersion modeling techniques for quantitative explosion risk assessment, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[65] J.M. Sohn, S.J. Kim, D.C. Kim, D.H. Kim, MD. Shafiqul, B.J. Kim, J.K. Seo and J.K. Paik, An evaluation of stiffened panels ultimate strength using ANSYS program, Proceedings of the ANSYS Korea User Conference, Gyeongju, Korea, 9-10 September 2010 (in Korean).
[66] D.C. Kim, S.J. Kim, B.J. Kim, J.K. Seo, J.K. Paik, and S.N. Atluri, Computational fluid dynamics method simulations on thermal radiation behaviour of heat shield, Proceedings of the ANSYS Korea User Conference, Gyeongju, Korea, 9-10 September 2010 (in Korean).
[67] G.C. Yu, J.Y. Yoon, S.J. Kim, D.H. Kim, B.J. Kim, J.K. Seo and J.K. Paik, A study on explosion loads on FPSO topsides using CFD simulation, The Annual Spring Meeting, Society of Naval Architects of Korea, Jeju, Korea, 3-4 June 2010 (in Korean).
[68] J.Y. Yoon, G.C. Yu, S.J. Kim, D.H. Kim, B.J. Kim, J.K. Seo and J.K. Paik, A study on the heat flux characteristics on effect of wind on FPSO topsides, The Annual Spring Meeting, Society of Naval Architects of Korea, Jeju, Korea, 3-4 June 2010 (in Korean).
[2] H.G. Lee, S.J. Kim, J.M. Sohn and A.R. Prabowo, Machine leaning based prediction of buckling in composite cylindrical shells under external pressure using design code, Proceedings of 43rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), 9-14 June 2024, Singapore.
[3] D.K. Kim, A.M.K. Wong, J. Hwang, S. Li, S.J. Kim and N.K Cho, Development of practical design formula for predicting the ultimate compressive strength of the cylindrically curved plates applicable in offshore wind turbine tower, Proceedings of 43rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), 9-14 June 2024, Singapore.
[4] H.K. Lee, S.J. Kim and J.M. Sohn, Sensitivity analysis of effective engineering constant and buckling pressure on composite cylinder structures using machine-learning, Proceedings of 36th Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2023), 10-13 October 2023, Busan, Republic of Korea.
[5] G. Taimuri, H. Le Sourne, T. Mikkola, S.J. Kim, P. Kujala and S. Hirdaris, Comparison of a simplified FSI model against super element model for the rapid evaluation of accidental loads following ship hard grounding, Proceedings of the 9th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2023), 11-13 September 2023, Nantes, France.
[6] H. Nubli, S.J. Kim, J.M. Sohn, D. Jung and J.H. Cho, A tensile test and finite element analysis of DH36 high-tensile steel at cryogenic temperature, Proceedings of 42nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), 11-16 June 2023, Melbourne, Australia.
[7] S.J. Kim, M. Kõrgesaar, P. Lehto, K. Berntsson, J.M. Sohn, S. Hirdaris, J. Romanoff, Review of the uncertainties in load and strength modelling in ship collisions, Proceedings of 8th International Conference on Marine Structures (MARSTRUCT 2021), 7-9 June 2021, Trondheim, Norway.
[8] H. Le Sourne, S.J. Kim, F. Conti, E. Bae, J.P. Pineau, T. Looten, L. Kaydihan, D. Vassalos, P. Kujala and S. Hirdaris, A comparison of crashworthiness methods for the assessment of ship damage extents, Proceedings of 1st International Conference on the Stability and Safety of Ships and Ocean Vehicles (STAB&S 2021), 7-11 June 2021, Glasgow, UK.
[9] S.J. Kim, G. Taimuri, P. Kujala, F. Conti, H. Le Sourne, J.P. Pineau, T. Looten, H. Bae, M.P. Mujeeb-Ahmed, D. Vassalos, L. Kaydihan and S. Hirdaris, Uncertainties in modelling loads following collision and grounding events, 5th Joint ISSC/ITTC International Workshop, 1-3 June 2021, Lisbon, Portugal.
[10] S.J. Kim, M. Körgersaar, G. Taimuri, P. Kujala and S. Hirdaris, A quasi-dynamic approach for the evaluation of structural response in ship collisions and groundings, Proceedings of the 30th International Ocean and Polar Engineering Conference (ISOPE 2020), 11-16 October 2020, Shanghai, China.
[11] A. Rajput, M. Ak, S.J. Kim, S.H. Noh, J.H. Park and J.K. Paik, Effects of the surface preparation on the life of epoxy coating in steel ship plates: an experimental study, Proceedings of the 3rd International Conference on Ships and Offshore Structures (ICSOS 2018), 17-19 September 2018, Gothenburg, Sweden.
[12] J.K. Paik, D.H. Lee, S.J. Kim, G. Thomas and M. Ma, A new method for determining the design values of wave-induced hull girder loads acting on ships, Proceedings of the 3rd International Conference on Ships and Offshore Structures (ICSOS 2018), 17-19 September 2018, Gothenburg, Sweden.
[13] S.J. Baek, J.M. Sohn, J.K. Paik and S.J. Kim, Development of rapid prediction method for residual strength of oil tankers subjected to ship-ship collision’, Proceedings of ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), 17-22 June 2018, Madrid, Spain.
[14] J.K. Paik, S.J. Kim, Y.K. Ko and S.A.M. Youssef, Collision risk assessment of a VLCC class tanker, Proceedings of SNAME Maritime Convention 2017, 23-28 October, TX, USA.
[15] Y.K. Ko, S.J. Kim and J.K. Paik, Contribution of a deformable striking-ship structure to the structural crashworthiness of ship-ship collisions, Proceedings of the 2nd International Conference on Ships and Offshore Structures (ICSOS 2017), 11-13 September, Shenzhen, China.
[16] S.J. Kim, B.J. Kim, J.K.Seo and J.K. Paik, A new method for structural assessment of topside structure subjected to hydrocarbon explosions, Proceedings of International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016), 11-14 December 2016, New Delhi, India.
[17] J.K. Paik, K.J. Kim, J.H. Lee, B.G. Jung, X. Han and S.J. Kim, Test database of the mechanical properties of mild, high-tensile and stainless steel and aluminum alloy associated with cold temperatures and strain rates, Proceedings of the 1st International Conference on Ships and Offshore Structures (ICSOS 2016), 31 August - 2 September 2016, Hamburg, Germany.
[18] S.J. Kim, J.B. Park, B.J. Kim, J.K. Seo, J.K. Paik, W.H. Shin and J.S. Park, Determination of fire accidental loads for aliminium safety helidecks, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2015), Busan, Korea, 15-16 September 2015.
[19] J.K. Paik, J. Czujko, S.J. Kim, J.C. Lee, B.J. Kim, J.K. Seo and Y.C. Ha, A new procedure for the nonlinear structural response analysis of offshore installations in explosions, Proceedings of SNAME Maritime Convention 2014, TX, USA, 22-24 October 2014.
[20] H.Y. Lei, S.J. Kim, J.C. Lee, C.B. Li, J.K. Paik and J.M. Sohn, Cost benefit analysis of corrugated blast walls, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[21] C.B. Li, S.J. Kim, J.C. Lee, J.K. Paik and J.M. Sohn, Dynamic structural response characteristics of perforated blast walls under hydrocarbon explosions, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[22] C.H. Song, S.J. Kim, J.K. Paik, H.B. Kim and D.K. Kim, Modified stiffener modeling technique for ultimate hull girder strength analysis by ALPS/HULL program, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[23] J.C. Lee, S.J. Kim, J.K. Seo, B.J. Kim, J.K. Paik, S.I. Park and Y.S. Hwang, Effects of joints and connections on nonlinear behavior of offshore platforms topside structures in explosions, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[24] S.I. Park, Y.S. Hwang, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, A study on structural strength assessment methods of topside structures on the offshore platform, Proceedings of 7th International Conference on Thin-Walled Structures (ICTWS 2014), Busan, Korea, 28 September - 2 October 2014.
[25] S.J. Kim, Interface between FLACS and LS-DYNA for nonlinear structural consequence analysis, Fire and Blast Information Group Meeting, Busan, Korea, 14 May 2014.
[26] S.J. Kim and J.K. Paik, Advanced method for ship structural design under slamming impact pressure loads, Proceedings of the 12th Practical Design of Ships and Other Floating Structures (PRADS 2013), pp.172-178, Changwon, Korea, 20-25 October 2013.
[27] S.J. Kim, J.M. Sohn, B.H. Kim, C.K. Kim, J.K. Paik, M. Samuelides and G.M. Katsaounis, Computational modelling of interaction between CFD and FEA simulations under gas explosion loads, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2012), Busan, Korea, 23-24 May 2012.
[28] J.M. Sohn, S.J. Kim, B.H. Kim and J.K. Paik, A study on the procedure for quantitative assessment of explosion risks in offshore installations, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2012), Busan, Korea, 23-24 May 2012.
[29] D. K. Kim, D. K. Park, S.J. Kim, H. B. Kim, J. K. Seo, B. J. Kim and J. K. Paik, Time-variant ultimate strength characteristics of corroded FPSO hull structures, Proceedings of International Conference Ship & Offshore Technology (ICSOT 2012), Busan, Korea, 23-24 May 2012.
[30] S.J. Kim, J.K. Seo and J.K. Paik, Interface between FLACS and LS-DYNA for nonlinear consequence analysis, FLACS User’s Group Meeting (FLUG 2012), Bergen, Norway, 15-16 May 2012.
[31] S.J. Kim, D.K. Kim, D.K. Park, J.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Effect of corrosion on the ultimate strength of double-hull oil tankers – part I: stiffened panels, Proceedings of The 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, Korea, 18-22 September 2011.
[32] D.C. Kim, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Computational and experimental fluid dynamic study of thermal radiation behavior of heat shield, ICCES`11 International Conference on Computational & Experimental Engineering and Sciences, Nanjing, China, 18-21 April 2011.
[33] J.M. Sohn, D.H. Kim, S.J. Kim, J.K. Seo, B.J. Kim, J.K. Paik, N. Underwood, G.K. Schleyer and S.N. Atluri, Nonlinear structural behavior of blast-loaded corrugated panels: analytical and numerical considerations, ICCES`11 International Conference on Computational & Experimental Engineering and Sciences, Nanjing, China, 18-21 April 2011.
[34] S.J. Kim, D.C. Kim, D.H. Kim, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, A benchmark study on the ultimate stiffened panel strength, ICCES`11 International Conference on Computational & Experimental Engineering and Sciences, Nanjing, China, 18-21 April 2011.
[35] J.K. Paik, S.J. Kim, D.C. Kim, D.H. Kim, P.A. Frieze, M. Abbattista, M. Vallascas and O.F. Hughes, Benchmark study on use of ALPS/ULSAP method to determine plate and stiffened panel ultimate strength, Proceedings of MARSTRUCT 2011, Hamburg, Germany, 28-30 March 2011.
[36] D.H. Kim, D.K. Kim, J.M. Sohn, MD.S. Islam, S.L. Kim, S.J. Kim, D.C. Kim, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, Nonlinear finite element method models for the buckling and ultimate strength analysis of steel stiffened-plate structures, The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, Busan, Korea, 17-21 August 2010.
[37] D.C. Kim, S.J. Kim, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, Computational fluid dynamics simulation of the thermal radiation behavior of heat shields, The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, Busan, Korea, 17-21 August 2010.
[38] S.J. Kim, J.Y. Yoon, G.C. Yu, J.K. Seo, B.J. Kim, J.K. Paik and S.N. Atluri, Computational fluid dynamics modeling techniques and their application in gas explosions, The 6th ICCES International Conference on Meshless and Other Novel Computational Methods, Busan, Korea, 17-21 August 2010.
[39] S.J. Kim, Effect of surrounding water on dynamic structural response of ships subject to navigational accidents, 44th Ocean Engineering Conference in Taiwan, Kaohsiung, Taiwan, 17-18 November 2022 (in Chinese).
[40] S.J. Baek, J.M. Sohn, J.K. Paik, S.J. Kim*, J.H. Byeon, A study on residual strength assessment to prevent sequential events of stranded oil tankers, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 8-9 November 2018 (in Korean).
[41] C.H. Song, S.J. Kim, D.H. Lee, J.K. Seo, M.S. Yi and C.M. Hyun, A study on the residual ultimate strength by post heating of high tensile thin-walled structures, The Annual Autumn Meeting, Society of Naval Architects of Korea, Yeosu, Korea, 2-3 November 2017 (in Korean).
[42] S.J. Baek, J.M. Sohn, J.K. Paik and S.J. Kim*, Development of method for calculation of residual strength of oil tanker to prevent a sequential event by collisions, The Annual Autumn Meeting, Society of Naval Architects of Korea, Yeosu, Korea, 2-3 November 2017 (in Korean).
[43] Y.K. Ko, S.J. Kim and J.K. Paik, Empirical formulation for calculation of strain-rate in collision, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 17-20 April 2017 (in Korean).
[44] M.H. Bae, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, An experimental and numerical study of combustible gas dispersion based on large-scaled experiment, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 19-20 May 2016 (in Korean).
[45] S.J. Kim, J.C. Lee, B.J. Kim, J.K. Seo, Y.C. Ha, J.K. Paik and J. Czujko, A new procedure for the nonlinear structural response analysis of offshore installations in explosions, The Annual Summer Meeting of the Korea Ship and Offshore Structures Congress, Society of Naval Architects of Korea, Busan, Korea, 18-19 September 2014. (in Korean)
[46] H.Y. Lei, S.J. Kim, J.C. Lee, C.B. Li, J.K. Seo, B.J. Kim and J.K. Paik, Cost benefit analysis of blast walls on offshore installations, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 22-23 May 2014 (in Korean).
[47] C.B. Li, S.J. Kim, J.C. Lee, H.Y. Lei, J.K. Seo, B.J. Kim and J.K. Paik, Structural response characteristics of perforated blast walls under hydrocarbon explosion, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 22-23 May 2014 (in Korean).
[48] Y.S. Kim, D.H. Lee, D.K. Park, S.J. Kim, J.K. Seo, B.J. Kim and J.K. Paik, The ultimate strength of stiffened panel in Arctic conditions, The Annual Autumn Meeting, Society of Naval Architects of Korea, Ulsan, Korea, 7-8 November 2013 (in Korean).
[49] S.J. Kim, D.J. Seong, J.C. Lee, C.B. Li, J.K. Seo, B.J. Kim and J.K. Paik, Structural impact characteristics of stiffened blast walls under explosion loads, The Annual Spring Meeting, Society of Naval Architects of Korea, Jeju, Korea, 23-25 May 2013 (in Korean).
[50] D.J. Seong, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Structural design of topside structure on offshore installation for verification experiment, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 15-16 November 2012 (in Korean).
[51] S.J. Kim, J.M. Sohn, B.H. Kim, D.J. Seong, D.K. Jo, J.K. Seo, B.J. Kim and J.K. Paik, The effect of explosion load shapes on corrugated blast wall on offshore installations, The Annual Spring Meeting, Society of Naval Architects of Korea, Daegu, Korea, 31 May – 1 June 2012 (in Korean).
[52] S.J. Kim, J.M. Sohn, D.K. Park, B.H. Kim, D.J. Seong, D.K. Jo, J.K. Seo, B.J. Kim and J.K. Paik, Structural impact characteristics of blast wall in Arctic conditions, The Annual Spring Meeting, Society of Naval Architects of Korea, Daegu, Korea, 31 May – 1 June 2012 (in Korean).
[53] J.M. Sohn, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, A study on development the interface for fluid-structural interaction analysis on offshore, The Annual Autumn Meeting, Society of Naval Architects of Korea, Mokpo, Korea, 3-4 December 2011 (in Korean).
[54] S.J. Kim, J.K. Paik, M.S. Kim and Tim Kent, Risk-based on structural design of nuclear-powered merchant ships: an overview, The Annual Autumn Meeting, Society of Naval Architects of Korea, Mokpo, Korea, 3-4 December 2011 (in Korean).
[55] S.J. Kim, D.K. Kim, D.K. Park and J.K. Paik, Ultimate strength based optimum structural design of a double-hull tankers using MEASTRO program, The Annual Autumn Meeting, Society of Naval Architects of Korea, Mokpo, Korea, 3-4 December 2011 (in Korean).
[56] J.M. Sohn, D.H. Kim, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, A study on nonlinear consequence structural analysis of blast wall on FPSO topsides under explosion loads, The Korean Offshore Design Committee Society of Ocean Engineers, Ulsan, Korea, 8 July 2011 (in Korean).
[57] D.K. Kim, D.K. Park, S.J. Kim, D.H. Park, H.B. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Effect of corrosion on the ultimate strength of double-hull oil tankers, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 2-3 June 2011 (in Korean).
[58] J.M. Sohn, D.H. Kim, S.J. Kim, B.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, Structural responds analysis techniques of blast wall for P-I design curve, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 2-3 June 2011 (in Korean).
[59] B.H. Kim, J.M. Sonh, S.J. Kim and J.K. Paik, A study on various blast wall shapes for quantitative explosion risk assessment, The Annual Spring Meeting, Society of Naval Architects of Korea, Busan, Korea, 2-3 June 2011 (in Korean).
[60] J.K. Paik, S.J. Kim, D.C. Kim, D.H. Kim, P.A. Frieze, M. Abbattista, M. Vallascas and O.F. Hughes, Benchmark study on use of ALPS/ULSAP method to determine plate and stiffened panel ultimate strength, Proceedings of Korean Ship and Offshore Structures Committee Society of Naval Architects of Korea, Seoul, Korea, 17 February 2011 (in Korean).
[61] J.M. Sohn, D.C. Kim, S.J. Kim, D.H. Kim, J.K. Paik, B.J. Kim and J.K. Seo, A benchmark study on the ultimate strength analysis techniques of stiffened panels, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[62] D.H. Kim, J.K. Seo, B.J. Kim, J.M. Sohn, G.Y. Yoon, S.J. Kim, and J.K. Paik, A study on structural design techniques of blast wall on FPSO Topsides, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[63] D.C. Kim, S.J. Kim, J.H. Kim, J.K. Seo, B.J. Kim and J.K. Paik, An experimental study on flare stack heat flux characteristics, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[64] S.J. Kim, J.K. Seo, B.J. Kim, J.Y. Yoon, D.H. Kim and J.K. Paik, A study on CFD gas dispersion modeling techniques for quantitative explosion risk assessment, The Annual Autumn Meeting, Society of Naval Architects of Korea, Changwon, Korea, 21-22 October 2010 (in Korean).
[65] J.M. Sohn, S.J. Kim, D.C. Kim, D.H. Kim, MD. Shafiqul, B.J. Kim, J.K. Seo and J.K. Paik, An evaluation of stiffened panels ultimate strength using ANSYS program, Proceedings of the ANSYS Korea User Conference, Gyeongju, Korea, 9-10 September 2010 (in Korean).
[66] D.C. Kim, S.J. Kim, B.J. Kim, J.K. Seo, J.K. Paik, and S.N. Atluri, Computational fluid dynamics method simulations on thermal radiation behaviour of heat shield, Proceedings of the ANSYS Korea User Conference, Gyeongju, Korea, 9-10 September 2010 (in Korean).
[67] G.C. Yu, J.Y. Yoon, S.J. Kim, D.H. Kim, B.J. Kim, J.K. Seo and J.K. Paik, A study on explosion loads on FPSO topsides using CFD simulation, The Annual Spring Meeting, Society of Naval Architects of Korea, Jeju, Korea, 3-4 June 2010 (in Korean).
[68] J.Y. Yoon, G.C. Yu, S.J. Kim, D.H. Kim, B.J. Kim, J.K. Seo and J.K. Paik, A study on the heat flux characteristics on effect of wind on FPSO topsides, The Annual Spring Meeting, Society of Naval Architects of Korea, Jeju, Korea, 3-4 June 2010 (in Korean).
Click Num:
Share